Grizzly G4173 1 8 HP owner manual Base Mounting

Base Mounting

Position the power feeder on the table top to determine where to drill your base mounting holes, so you can maximize power feeder swing and adjustment options.

There are thee mounting options available: Through Bolt Mounting, Direct Mounting, and Quick Holder Kit Mounting (discussed on Page 17). Choose an option that suits your require- ments.

Whichever way you mount your power feeder, you must be able to use the handwheels and lock levers to position the rubber wheels parallel with the table surface and 1⁄8" lower than the thickness of your workpiece.

Also, you must be able to point the power feeder slightly towards the machine fence (Figure 15). In other words, the tracking of the power feeder must be toed-in approximately 1° to 1.5° degrees toward the machine fence so the rubber wheels slightly push the workpiece against the fence during cut- ting operations.

Shaper		Jointer	Tablesaw
	;ZcXZ	;ZcXZ	;ZcXZ
			7aVYZ
	8jiiZg
)i]"GdaaZg			;ZZY
BdYZah	;ZZY	;ZZY
		8jiiZg]ZVY

Figure 15. Typical power feed mounting on a shaper, jointer, and tablesaw.

-16- Model G4173 1⁄8 HP Power Feeder