Grizzly G7209 instruction manual Operations, Pre-Run Check, Test Run

SECTION 6: OPERATIONS

Pre-Run Check

Before you begin to use your Model G7209/10 14" Table Saw, you should give it a thorough inspection. While making your inspection, ask yourself the following questions:

1.Are all the fasteners tight?

2.Is the blade mounted correctly?

3.Is the saw stable?

4.Is it wired properly?

5.Is your electrical system properly config- ured?

6.Have you checked your work piece for obvi- ous defects?

7.Are the V-belts properly tensioned and the pulleys properly aligned?

8.Is the guard assembly installed and func- tional?

9.Have you checked the saw blade clearance when it is adjusted to varying angles and depths?

10.Have you read all warnings and directions regarding the operation of this machine?

Test Run

!	Disconnect power to the
	machine when perform-
	ing	any	maintenance,
	assembly		or	adjust-
	ments. Failure to do this
	may	result in		serious
	personal injury.

Keep loose clothing rolled up and out of the way of machinery and keep hair pulled back.

Wear safety glasses dur- ing the entire operations process. Failure to com- ply may result in serious personal injury.

1.Face the table saw and stand to the left of the blade path.

2.With one finger on the START button and one finger on the STOP button, turn the saw on. Be ready to turn it off in case of mishap.

3.Watch and listen to the saw. Note whether there are any unusual sounds or excessive vibrations.

G7209/10 14'' Table Saw -25-