Grizzly G9969 owner manual Column, Headstock Bracket, Components and Hardware Needed Qty

Lag Shield Anchor

Lag Bolt

Typical Anchor Stud

Machine Mount

Figure 5. Different floor mounting methods.

Column

Components and Hardware Needed:			Qty
Base			1
Column			1
Hex Bolts 1⁄	"-13 x 2"		4
2		"	4
Flat Washers 1⁄
	2

To install the column on the base:

1.Place the column on the base, making sure to align the holes in both the column and the base.

2.Have an assistant hold the column steady- while you secure the column to the base with the hex bolts, as shown in Figure 6.

G9969 Radial Drill Press

Figure 6. Assembled column and base.

Headstock Bracket

Components and Hardware Needed:	Qty
Headstock Bracket	1
Column	1
Column Cap	1
Lock Handles	2
Crank Handle	1
Crank Handle Arm	1

To mount the headstock bracket on the col- umn:

1.Mark the top of the rack, as shown in Figure 7, to reference which end is the top.

Figure 7. Marking the top of the rack.

2.Loosen the cap screw on the column cap and remove the cap and rack from the column.

-15-