SECTION 4: OPERATIONS
Operation Safety |
| Safety Switch Key |
|
|
|
|
|
|
Wear safety glasses when operating this machine. Serious injury may occur if this warning is ignored!
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving machinery.
NOTICE
If you have never used this type of machine or equipment before, WE STRONGLY REC- OMMEND that you read books, trade maga- zines, or get formal training before begin- ning any projects. Regardless of the con- tent in this section, Grizzly Industrial will not be held liable for accidents caused by lack of training.
To prevent the machine from starting, remove the safety switch key (Figure 17) from the paddle switch.
Figure 17. Removing key to disable switch.
Changing Bits
The Model G9969 is equipped with a key chuck, which can be opened and securely closed by using the included chuck key. Any drill bit you install in the chuck must be installed tightly enough that it will not come loose during opera- tion.
To install a drill bit:
1.UNPLUG THE DRILL PRESS!
2.Open the drill chuck wide enough to accept the shank of the drill bit.
3.Insert the drill bit as far as possible into the chuck WITHOUT allowing the chuck jaws to touch the fluted portion of the bit, and hand tighten the chuck.
G9969 Radial Drill Press |
