Grizzly H3114 instruction manual Circuit Requirements, General, Electrical

SECTION 3: CIRCUIT REQUIREMENTS

General

If the machine is wired incorrectly a fire could result. Make sure your wiring, recep- tacle, plug, and circuit breaker can handle the current draw of the machine. If you are not sure that your electrical circuit can han- dle the current draw, get a qualified electri- cian to test your electrical system and do any required upgrades. Do not attempt to modify an existing circuit by only replacing the circuit breaker with one rated for a high- er amperage draw than the wiring, recepta- cle, and plug are rated for.

The power switch (Page 7, Figure 2) on the Model H3114 is designed to work with most routers and other electrical accessories. The power switch provides the convenience of switch- ing power to the router and accessories at the front of the router table instead of having to reach under the table and locate multiple switches. The power switch also allows multiple devices such as lights or vacuums to be powered on when the router is powered on.

Electrical

The Model H3114 power switch is designed to accept 2-prong DOUBLE INSULATED plugs or 3- prong grounding type plugs. The power switch plugs into a wall outlet that is properly grounded as shown in Figure 1.

Grounded Outlet

Grounding Prong

Current Carrying Prongs

Figure 1. Power switch 3-prong plug and

grounding style outlet.

-6- H3114 Router Table