Grizzly H7664 instruction manual Introduction, Foreword Contact Info, Tool Data

SECTION 2: INTRODUCTION

Foreword Contact Info

We are proud to offer the Grizzly Model H7664 2-in-1 Combination Nailer/Stapler. This model is part of a growing Grizzly family of fine pneumatic tools. When used according to the guidelines set forth in this manual, you can expect years of trouble- free, enjoyable operation and proof of Grizzly’s commitment to customer satis- faction.

The Model H7664 features a 360° exhaust port, comfort grip rubber handle, and eco- nomical air consumption with low noise. The Model H7664 can shoot 5⁄8"-2", 18 Gauge brad nails and 18 Gauge 5⁄8"-15⁄8", 1⁄4" crown staples.

The specifications, details, and photo- graphs in this manual represent the Model H7664 as supplied when the manual was prepared. However, owing to Grizzly’s pol- icy of continuous improvement, changes may be made at any time with no obliga- tion on the part of Grizzly.

Tool Data

Brad Length	5⁄8"-2" (18	Gauge)
Staple Length		5⁄8"-15⁄8"
Staple Crown	1⁄4" (18	Gauge)
Magazine Capacity	100 pieces
Air Inlet		¼" NPT
Weight		3.3 lbs.
Operating Pressure	60-100 PSI

If you have any comments regarding this manual, please write to us at the following address:

Grizzly Industrial, Inc.

C/O Technical Documentation Manager

P.O. Box 2069

Bellingham, WA 98227-2069

Most importantly, we stand behind our tools. If you have any service questions or parts requests, please call or write us at the location listed below.

Grizzly Industrial, Inc.

1203 Lycoming Mall Circle

Muncy, PA 17756

Phone: (570) 546-9663

Fax: (800) 438-5901

E-Mail: techsupport@grizzly.com

Web Site: http://www.grizzly.com

Read the manual before operation. Become familiar with this nailer/sta- pler, its safety instructions, and its operation before beginning any work. Serious personal injury may result if safety or operational information is not understood or followed.

-8- H7664 2-in-1 Combination Nailer/Stapler