Grizzly Model G0550 Beginning Assembly G0550 Open Stand, Tools Needed, To assemble the open stand

Beginning Assembly G0550 Open Stand

This section covers the basic assembly and adjustment instructions needed to begin opera- tion. Complete the assembly in the order provid- ed in this manual and then read the remaining portion of the manual before attempting any type of operation.

Your safety is important! Please follow the warnings below during this entire section:

Loose hair and clothing could get caught in machinery and cause serious personal injury. Keep loose clothing rolled up and long hair tied up and away from machinery.

Disconnect power to the machine during the

entire assembly process. Failure to do this may result in seri- ous personal injury.

Sharp edges on metal parts may cause person- al injury. Examine the edges of all metal parts before handling.

Components and Hardware Needed:	Qty
Legs	4
Lower Braces	4
Predrilled Upper Braces	4
Carriage Bolts 5⁄16"-18 x 1⁄2"	32
Hex Nuts 5⁄16"-18	32
Flat Washers 5⁄16"	32
Tools Needed:
12/14mm Combo Wrench	1
Note—The following steps are for the G0550
only.
To assemble the open stand:

1.Connect the lower and upper braces to the legs of the stand with the carriage bolts, hex nuts and flat washers. See Figure 7.

Figure 7. Upper and lower braces

connected to leg.

-14- G0550/G0551 15" Planer