SECTION 3: OPERATIONS
Damage to your eyes or hands could result from using this slip roll without proper pro- tective gear. Always wear safety glasses and leather gloves when operating this slip roll.
Sharp edges of sheet metal can easily cut fingers, hands, or arms. Always wear leather gloves when handling sheet metal, and always chamfer and debur the edges.
If you are not experienced with this type of machine, WE STRONgLy REcOMMEND that you seek additional training outside of this manual. Read books/magazines or get formal training before beginning any proj- ects. Regardless of the content in this sec- tion, grizzly Industrial will not be held liable for accidents caused by lack of training.
Model T10727 (Mfg. Since 12/12)
Basic Controls
Use the descriptions below and Figure 6 below to become familiar with the basic controls and components of the slip roll.
Thickness
Adjustment 
Knob
Lower |
|
| Upper | |
|
| Roller | ||
Roller |
|
| ||
|
|
| ||
Rear |
|
| Workpiece | |
Roller |
|
| ||
|
|
| Support | |
Radius | Rear | Front | Hand | |
Adjustment | ||||
Crank | ||||
|
| |||
Knob |
|
| ||
|
|
|
Figure 6. Model T10727 basic controls and
components.
Thickness Adjustment Knob. Raises and low- ers the upper roller to adjust for the thickness of different workpieces. The graduated dial has 0.05mm increments with one full revolution equal- ing 1.25mm of upper roller movement.
Radius Adjustment Knob. Raises and lowers the rear roller to create smaller and larger radius bends.
Hand Crank: Rotates the rollers to feed the workpiece through the machine.
