Groupe SEB USA - T-FAL 700, 1000 English, Use of the various elements, Single bowl model, time

4

▲

				ENGLISH
Use of the various elements
Single bowl model		Model with more than one bowl.
•	Place the food in the bowl.	The bowls and grids can be assembled in
• If you wish to cook different types of		any order.
	food at the same time, you can use the	•	Place the food in the bowls. We recom-
	food separator (depending on model).		mend that you put the largest pieces of
	Place it in the centre of the bowl - Fig. 4		food, requiring the longest cooking
	Put the food into each compartment.		time, in the lowest bowl.
•	Place the bowl onto the juice collector.	•	Place the bowls onto the juice collector.
Use of several steam bowls at the same		• If you are cooking food with different
time			cooking times, start cooking in the
•	It is possible to put different food items		lower bowl with the food requiring a
	in each bowl, but make sure that their		longer cooking time. When the timer
	flavours complement each other.		reaches the setting for cooking the food
• It is also possible (depending on			which requires a shorter cooking time,
	model) to put the juice tray / separator		remove the lid using a cloth, and put
	between the bowls. This avoids mixing		the higher bowl in position. Close and
	the cooking juices from each bowl. In		continue cooking.
	this way you can cook different items
	of food whilst conserving their flavour.

5

6

▲ ▲ ▲

Use of removable grids - Fig. 5

• The bowls are fitted with removable grids which increase the volume of the cooking area and can be used to cook large items of food (whole chickens, kebabs, artichokes, lobsters, etc.

To put the grids in position - Fig. 6

•Take the grid the right way up (clip fa- cing downwards).

•Place the grid in the bowl.

•Press in the clip area to clip-on onto the

bowl.

To remove the grids - Fig. 7

•To unclip the grid, press on the top from the outside.

Caution: the bowl placed on the juice collector must always have its grid fit- ted.

7