Troubleshooting
Troubleshooting
Electrical devices can experience malfunctions. This is not necessarily always a fault on the device. Thus, based on the following table, check if you can eliminate the malfunction yourself.
Malfunction | Possible cause | Repair |
Device does not switch on. | Battery empty. | Charge or replace the battery. (See the |
| Power supply interrupted. | section “Insert batteries or rechargeable |
|
| batteries” and “Charging of Rechargeable |
|
| Batteries”.) |
Device does not respond to | Key lock activated. | Move the On/Off switch to the »ON« posi- |
input commands. |
| tion to deactivate the key lock. |
No sound audible, or too low. | Set volume (See the section “Setting the | |
| ly set. | volume“). |
Sound distorted or too loud. | Microphone sensitivity or play- | Set volume (See the section “Setting the |
| back volume incorrectly set. | volume“) or set microphone sensitivity to |
|
| „ambience loud“ (See the section „Micro- |
|
| phone sensitivity“ in the comprehensive |
|
| user‘s manual on the delivered CD) |
No menu functions available. | Easy Mode activated. | Press the „NEW“ button when switching |
|
| on the Digta 420 till the initial display view |
|
| appears on the display (hour glass). |
22
