Grundig cirflexx UMS 5400 DEC manual 1445, 1849, 2316

14:45

￿MON

18:49

FRI

￿ WEC

23:16

￿TUE

TIMER MODE ________________________________________

9Press »INTRO/REP./￿« to finish the settings.

–Display: »e« or »￿«, the day and time.

–The hi-fi system switches on at the set time with the selected signal source (maximum alarm duration 90 minutes).

Note:

The volume of the alarm increases continually from zero onwards until an individually set maximum volume is reached. If you press »– ￿ +« during the alarm in tuner, CD mode or USB mode, the volume will not increase any further.

Interrupting the alarm

1During the alarm, press »SNOOZE« on the remote control.

–The alarm signal stops.

–The alarm goes off again at five-minute intervals (alarm duration – 90 minutes).

Cancelling the alarm for the day

1Switch the hi-fi system off by pressing »ON/OFF« when the alarm is sounding.

– The switch-on timer remains activated for the next day.

Switching off the alarm for the weekend

You can switch off the alarm function over the weekend. The entered alarm times are saved.

1Switch off the alarm function with »WEC«.

–Display: » WEC «.

2Press »WEC« to reactivate the alarm function.

–Display: » WEC « disappears.

Activating and deactivating switch-on timer

1To deactivate the switch-on timer, press »INTRO/REP./￿« briefly in standby mode.

–Display: »e« or »￿« disappear.

–The switch-on timer is deactivated, the set alarm time is stored.

2To activate the switch-on timer, press »INTRO/REP./￿« briefly in standby mode.

–Display: »e« or »￿«.

ENGLISH

33