Grundig cirflexx UMS 5400 DEC manual Setting and storing radio channels, Tuner, Energy, English

SETTINGS ______________________________________________

Setting and storing radio channels

Automatic station search (ASP)

02	PROG
	MHz

FM 97.55

16

TUNER

f

16 PROG

!

ENERGY

f

MHz

FM 87.65

The automatic station search looks for the 40 stations with the best reception and stores them.

1Start the automatic search in tuner mode by pressing and holding down »PROG./RAND./￿«.

–Display: »FM«, the frequency in rapid run-through and »PROG«.

–The search has started. After the search has finished, you will hear the station stored at preset position 01.

Notes:

The automatic station search can be interrupted by briefly pressing »■«.

The automatic station search can be repeated any time by pressing and holding down »PROG./RAND./￿« until the frequency display switches to rapid run-through. The stations stored previously will be deleted.

Automatic station search

1Switch on the hi-fi system by pressing »TUNER/BAND«.

–Display: »TUNER«, then the wave band and frequency or channel name.

2Press »TUNER/BAND« to select the frequency band (FM or MW).

–Display: »FM« or »MW«.

3Activate the station search by pressing »c TUNING/ ALBUM x« until the frequency display changes to rapid run- through.

–The search stops when a channel is found.

Manual station search

1To move the frequency forward in steps, briefly press »c TUNING/ALBUM x« several times.

– The frequency changes in 50 kHz steps.

ENGLISH

17