Grundig cirflexx UMS 5400 DEC manual 12:02, 0:03, 12:03, 12:24, Setting the time, Ct On

PM

12:02

MON

0:03

MON

12:03

MON

12:24

CT ON

SETTINGS ______________________________________________

Setting the time

A demo programme starts when you connect the hi-fi system to the mains for the first time. To end the demo programme switch the hi-fi system to standby by pressing »ON/OFF« briefly. Now the time and day displays will flash, indicating that they need to be set. The following settings may only be performed in standby mode.

1To set the 12-hour format, briefly press »PROG./RAND./￿«.

–Display: briefly »12HR«, then the current time, for example »PM MON 12:02« (»PM« for the second half of the day).

2To set the 24-hour format, press »PROG./RAND./￿« again.

–Display: briefly »24HR«, then the current time, for example »MON 0:03«.

3To set the time, press and hold down »PROG./RAND./￿«.

–Display: the hours flash.

4Set the hours using »c TUNING/ALBUM x« and press »PROG./RAND./￿« to confirm.

–Display: the minutes flash.

5Set the minutes using »c TUNING/ALBUM x« and press »PROG./RAND./￿« to confirm.

–Display: the day of the week flashes.

6Set the day of the week using »c TUNING/ALBUMx« and press »PROG./RAND./￿« to confirm.

–Display: »CT ON« flashes.

7Set the RDS time synchronisation with »c TUNING/ALBUM x« and confirm with »PROG./RAND./￿«.

Notes:

You must reset the time after a power failure or when the mains plug is pulled out.

Some RDS channels transmit an RDS time signal (CT). If the selected RDS channel transmits this time information and the RDS time synchronisation is set to »CT ON« on the hi-fi, then the time is automatically updated (»w« flashes in the display). This takes about five minutes.

16