Grundig DR 3400 DD Tuning and storing radio stations, Using the automatic station search ASP

SETTINGS ______________________________________________

Tuning and storing radio stations ...

FM 87.50 MHz

FM03 92.50 MHz

FM 100.60 MHz

FM - - - - 8

You can store up to 30 FM radio stations and 30 AM radio stations. You can see the displays for this in the DVD receiver.

... using the automatic station search (ASP)

1Switch on the DVD receiver from standby by pressing »9« on the remote control or »ON/OFF« on the device.

–The DVD receiver switches on with the last input source selected.

2Press »AM FM« on the remote control or »FUNCTION« on the DVD receiver to select the TUNER input source.

–Display on the DVD receiver: e.g. »FM 87.50 MHz«.

3To start the automatic station search, press »M« on the remote control until »AUTO SAVE« appears in the display.

–The automatic station search begins. The receiver searches for up to 30 stations with the strongest signals in the FM range and another 30 in the AM range.

–After the search has finished, you will hear the station stored at position 1.

Note:

You can stop the search by pressing »M« on the remote control (display: »SAVE STOP«).

... manually

1Press »AM FM« on the remote control or »FUNCTION« on the DVD receiver to select the waveband (FM or AM).

2To start the search, press »m« or »,« until the frequency in the search changes.

–The search stops when a radio station is found.

–Display: e.g. »FM 100.60 MHz«.

Note:

To change the frequency in steps, briefly press »m« or »,« several times.

–Display: the frequency in 50 kHz increments or

Enter the frequency directly with »1 ... 0« and press »OK« to confirm.

–Display: e.g. »FM - - - - 8«, then e.g. »FM - 88.60«.

–The radio station is then played.

24