8 108933

INSTALL AN ATTENUATOR
StrayUHF signals can block signalsfrom the remote control
tothe receiver. Toprevent blocks, youcan install a 10 dB attenuator
(youcan buy one from a consumer electronicsparts store).
Note: Thiswill help keep out stray UHF signals,but also cut down
howfar away you can use the remote control.
1.Take the UHF antennaoff
ofthe receiver’s back panel
UHF Remote Antennainput.
2.Put a 10 dB attenuator onto the
UHF Remote Antennainput.
3.Put the UHF antenna onto the
attenuator.
SWITCHBET WEEN TV AND DEVICE VOLUME CONTROL
Ifyou set up the remote to control a television,the Mute and Volu me
buttonscontrol the TV volume, in most modes. But,if you use the Aux
mode to control a tuner or a mplifier and the devic e has a volume
setting,you can set up the remote to controlthe device’s volume
instead