Grundig Platinum PVR Remote Control R EMOTE C ONTROL B

REMOTE CONTROL BUTTONS

Whenyou get the remote it’salready setuptocontrol

thereceiver. But,you must set up the remote to control

theTV before you can use the Mute and Vol ume buttons.

Onlythe buttons we tell you about here controlthe

receiver. Some of the buttonswe tell you about here

mayno t controlyour receiver. Pleasesee the receiver

UserGuide for info about the receiver’s features.

Pleaseremember, the outsidefront cover of this Guide

showsyou the whole remote control.

PressthisbuttontosettheremotetoSat(“satellite”)mode

tocontrol the receiver. The Sat mode button’s back light

flashesonce to show you’ve set the remoteto Sat mode.

Make sure you keep the remote in Sat mode to use

thebuttons we tell you about here.

TV/VIDEOBU TTON

Ifyou connect the receiver withits back panel

TVAntenna/Cable In and TV Set Out ports, use this

buttonto switch the receiver betweenthe satellite signal

(connectit to the Satellite In port) and another video signal

likea cable or broadcast TV antennainput (connect it

tothe receiver’s TV Antenna/Cable In input).

Note: Ifyou connect the receiverto other devices

withthe phono (RCA) jacks or the S-Video output,

youmust use the menus each device displaysto change

theinput from local broadcast TVto satellite TV.

Pressthe blank Power button to turn the receiveron

oro ff. T he green Power light on the receiver’sfront

panelturns on to show the receiveris on, and turns off

tos how it’s off.

Note: To use th e TVPower button, you must set up

theremotetocontroltheTV.PleaseseeSetUpthe

RemoteControl on page 4 for what to do.

text_dishpvr.fmPage 10 Thursday,July12, 2001 10:02AM