Universal Remote Control Handset

The Telepilot TP 720 SAT supplied with the receiver can be used not only for the satellite receiver STR 400 AP but also for a number of GRUNDIG SAT receivers and equivalent receivers of other manufacturers.

In addition, it can be used for the remote control of a large number of video recorders and TV sets of GRUNDIG as well as of other manufacturers.

Certain GRUNDIG satellite receivers have 2 remote control levels to enable a separate control of 2 receivers in the same room. Your Telepilot also operates with this second remote control level.

At the factory, the Telepilot has been preset so that its main function is the control of the SAT receiver, and its second function the control of TV sets or video recorders.

For this, it is necessary to press the ¢TV (8) or VIDEO (ßZ)

SAT

button in addition to the desired function button.

In the following table you will find the infrared code numbers which are necessary for changing the programming.

The factory-preset mode is marked by arrows in the table. If the batteries are removed for a longer time or if the battery change takes a longer time, this basic setting will automa- tically be recovered!

You can call up the programmed code numbersßZ on the pic- ture screen by holding down3the VIDEO ( ) button and pressing in addition the .( ) button.

Example: Basic setting. The display indicates one after the other:

IR-CODE

30 00 90

30 means:

GRUNDIG video recorder IR level 1.

00 means:

Main function: SAT receiver.

 

Second function: TV set.

90 means:

GRUNDIG TV sets.

If you hold down the VIDEO button (ßZ), you can enter dif-

ferent IR code6numbers with the numeric keypad and store with the O( ) button. For this, the on-screen display of the code numbers needs not to be on. As there are no redun- dant code numbers, you need not enter the entire code sequence but only the code number for the unit you wish to control.

Nr.

VCR transmission mode

Manufacturer (incomplete)

30

Grundig 10 Bit, VCR 1

Grundig, …

33

Grundig 10 Bit, VCR 2

Grundig, …

34

RCS-16, VCR 1

others

35

RCS-16, VCR 2

others

36

RC-5, VCR 1

Philips

39

RC-5, VCR 2

Philips

40

AEHA, VCR 1

Blaupunkt, …

43

AEHA, VCR 2

Blaupunkt, …

44

Matsushita, VCR 1

Blaupunkt, …

45

Matsushita, VCR 2

Blaupunkt, …

46

Thomson-new, VCR 1

Saba, Nordmende, …

49

Thomson-new, VCR 2

Saba, Nordmende, …

50

Thomson-old, Model 1

 

53

Thomson-old, Model 2

 

54

Thomson-old, Model 3

 

55

JVC, VCR 1

JVC, Telefunken, …

56

JVC, VCR 2

JVC, Telefunken, …

59

Nokia

Nokia

60

Löwe

Löwe

63

Sony, VCR 1

Sony

64

Sony, VCR 2

Sony

65

Sony, VCR 3

Sony

Nr.

Basic level for Sat/TV units

 

00

SAT

 

09

TV

 

 

 

 

Nr.

TV transmission mode

Manufacturer (incomplete)

90

Grundig 10 Bit

Grundig...

93

RC-5

Philips, …

94

SGS

Telefunken

95

Sony

Sony

￿27

Page 27
Image 27
Grundig STR 400 AP manual Universal Remote Control Handset, 30 00, For this, it is necessary to press the ¢TV 8 or Video ßZ