Important Information
General | Selecting the Aerial Input |
For the description of the unit´s functions, it is assumed that the aerial has correctly been installed and that the receiver has correctly been connected.
Button Lock
Attention!
Except of the ¢</ > and ¢Radio buttons, all buttons are locked to prevent inadvertent operation.
To clear the lock, press one of the locked buttons for more than 3 seconds.
When switching the receiver off by means of the POWER
¢I switch, or with the remote control handset to standby, the lock is activated again.
Connecting the SAT Receiver to the Television
Best picture quality is obtained when the receiver and the television are connected by means of a
If this channel should already be occupied by your video recorder or a terrestrial station, it is possible to change the channel (see paragraphe "Modulat. – Adjusting the Modulator Channel"). You have the choice between channel 25 and channel 60. The televison must also be tuned to this channel.
16:9 Switching
If a switching voltage (6 V) for the 16:9 picture format is pre- sent on the
The receiver is provided with two aerial inputs. Preprogram- ming in the factory has been made for the standard solution, comprising one LNC with frequency switching by means of a 14/18 V supply voltage, and polarization switching by means of a magnetic or mechanic polarizer.
If you wish to implement different solutions, such as, for example,
Press the ¢V/H button twice, then use the ¢</ > buttons to select input A qZ or B qU. The display indicates, for exam- ple:
TIMER o p ü +
I99 INPUTXAX STEREO
SIGNAL IIIIIIIIIIIII
Store the setting with the ¢MEMORY button.
The display indicates again the current programme position.
See also section "Adapting the Polarizer, Installation Menu".
If there should be interferences visible in the form of spikes (short black or white lines), these can be eliminated by opti- mizing the input frequency setting. For this, press the ¢P/F button and adjust the value giving the best picture on the TV screen by means of the ¢</ > buttons.
Store the corrected value in memory by pressing the
¢MEMORY button.
Hint
The receiver is already preprogrammed to all current pro- grammes from a number of satellites.
See the yellow pages: "Station Table of the Satellite Stations".
If you wish a different programme order, it is very easy to change the existing order.
For detailed information, see the corresponding explanation (SORT function in the chapter "The Mode Menu").
10
