The MODE Menu
MODULAT. – Adjusting the Modulator Channel
The display indicates "MODULAT." .
With the ¢</ > buttons, it is possible to select an HF chan- nel between CH 25 and CH 60 of the PLL modulator. The fac-
The TV receiver needs to be connected via the HF output of the SAT receiver if it has no
It is also possible to connect an additional TV receiver (e.g., in the sleeping room) to this socket. In this case, the TV receiver can be controlled via an additional infrared receiver and a
ATS – Automatic Tuning System
It is possible to effect an automatic search for the stations (pro- grammes) of a new satellite and store the desired stations in memory.
To do this, first manually direct the aerial with the help of the aerial menu at the "new" satellite (see chapter "Basic Adjustment of the Polarmount Aerial"). Next, select the ATS menu option and start the automatic search by pressing the ¢> button.
Stations are searched in direction of increasing frequencies. If a station has been found, this is automatically finetuned.
It is possible to store the found station in memory by pres- sing the ¢MEMORY button, or to restart the search with the
¢> button. After each storage function, the programme posi- tion is incremented by one. If the whole frequency range has
been run through, use the ¢H/V button to select the other polarity and start the search function again.
Existing station designations will be erased.
The search function is infinite. When the highest frequency (13000 MHz) has been reached, the search is automatically restarted at 10700 MHz. The frequency band which can actually be received depends on the used LNC.
Necessary picture and sound corrections such as, for exam- ple, sorting, copying, sound carrier and mono/stereo chan- ges, must be carried out now, not during the ATS search fun- ction.
When the search is concluded, it is very easy to determine the desired programme order with the "SORT" menu option.
20:15 – Time and Date
The display indicates the time, for example:
TIMER o p ü +
I99 X20 : 14XX STEREO
SIGNAL IIIIIIIIIIIII
If the clock is running, the colon between the hours and minutes indication is flashing.
With the ¢> button, you can switch between time and date indication.
With the numeric buttons on the remote control handset, it is possible to set (correct) the time and date (summer time/win- ter time).
After having entered the last digit, time setting is concluded.
Invalid values (e.g. 31.2.) are ignored. To ensure that ulterior Timer functions are correctly started, the clock should preci- sely be set.
CODE – Child Lock
It is possible to protect your receiver against unauthorized use (child lock).
Enter your
TIMER o p ü +
I99 CODE2537 STEREO
SIGNAL IIIIIIIIIIIII
The child lock is activated by pressing the Obutton.
The display indicates for approx. 3 seconds "SET".
Then, the display automatically indicates the current pro- gramme position number.
Now, when switching off the unit, it will be locked.
When switching the unit on again with the power switch or, from standby, with the remote control handset, the display indicates "CODE".
This message prompts you to enter your personal security code. When entering the code, this will be hidden:
TIMER o p ü +
I99 CODE---- STEREO
SIGNAL IIIIIIIIIIIII
If the correct code number is entered, the receiver will be unlocked and switched to the programme position selected before.
However, the child lock remains active, i.e. the receiver is locked again when switching it off the next time.
24
