RCA F19421 manual Buttons on the Remote Control, Continues on next

Chapter 1: Getting Started

DISPLAY		POWER
MUTE		PREV CH
	CHAN
VOL		VOL
	CHAN
CLEAR	MENU	RESET
1	2	3
4	5	6
7	8	9
	0
INPUT		SKIP

The Buttons on the Remote Control

0-9 (Number buttons) Enter channel numbers directly through the remote control. This button can also be used to select numbered menu items directly.

To enter a two-digit channel, press the two digits. To enter a three-digit channel, press and hold the first digit for two seconds until two dashes appear to the right of the number, then add the second two. Example: to tune to channel 123, press and hold 1 for two seconds, press 2, then press 3.

CHAN (up and down) buttons Scan up or down through the current channel list. Press once to change the channel up or down; press and hold to continue changing channels. Also used as up and down arrows in the menu system.

CLEAR Removes any menu or display from the screen and returns you to TV viewing. Also cancels the SKIP timer.

DISPLAY Brings up available channel information. This button is also referred to as INFO in the TV’s menu system.

INPUT Changes your TV to its video input channel. The Video Input Channel is the channel your TV must tune to in order for you to access a component that’s connected to the AUDIO and VIDEO jacks on the front of your TV. Example: to view a tape from your camcorder, connect the camcorder to the TV’s AUDIO and VIDEO jacks on the TV’s front panel with the audio/video cables.

MENU Brings up the Main menu. When in the menu system, selects highlighted items or returns you to the previous menu.

MUTE Lowers the volume to its minimum level. Press again to restore volume.

Continues on next page...

Graphics contained within this publication are for representation only. Your unit might differ slightly. 5