![](/images/new-backgrounds/1317683/31768323x1.webp)
Installing the Gate Operator
This unit must only be installed by an experienced technician.
Preparation of the Gate
Before installing the GTO swing gate operator, make sure:
•the gate is properly installed.
•the gate is plumb, level, and moves freely.
•the gate does not bind or drag on the ground.
Overview of a Single Gate Operator Installation
The diagram below is an example of a single swing gate installation with required safety features. The operator must be installed on the inside of the gate. You must install safety edges and photo beams (not included) to reduce the possibility of bodily injury.
NOTE: A separate gate or entrance must be installed for pedestrian use.
Safety Edge | Warning Sign | Safety Edge | Receiver |
| |||
|
|
|
Operator | Use PVC conduit |
| for Receiver wire |
Safety Edge | Photo Beams | AC POWER |
| ||
|
| |
| Photo Beams | Use rigid conduit |
|
| for inbound AC wire. |
Photo Beam
Photo Beam
9