Haier 0120505609 manual General information, For Switzerland only, Capacity 15 place settings

en

General information

Measures must be taken to ensure that built-under and built-in units that are subsequently re-sited as free-standing appliances cannot topple over. This can be achieved by bolting the dishwasher to the wall or fitting it under a continuous work surface which is screwed to the adjacent cupboards.

For Switzerland only:

There are no restrictions on installing the appliance between wooden or plastic walls as part of a fitted kitchen. If the appliance is not plugged into a wall socket, it must be connected to the mains via a separator for all poles within the domestic wiring system. This device must have a gap of at least 3mm between open contacts, in order to conform with relevant safety regulations.

Information on comparability tests implemented in compliance with

EN 50242

Appliance loaded in accordance with standard specifications.

Example of loaded dishwasher: See Fig 1 , 2 and 3.

Capacity: 15 place settings

Comparability programme: Normal wash

Rinse-aid setting: 5

Detergent: 30+7.5g

Fig.1

Fig.2

		4	4	4
		4	4	4
		2 3 1
		2 3 2
		1	3 1
1	2	2 3 2
		1	3 1
		2 3 2
		1	3 1
		2 3 2
		1	3 1
		2 3 2
		1	3	1
		2 3 2
3	4	1	3	1
		2	3 2		Fig.3
		1	3 1

27

Height-adjustable top-basket must be inserted in the uppermost position.

If the comparability tests do not comply fully with EN 50242, e.g., degree of soiling, type of dishes and cutlery, etc., contact the appliance manufacturer before starting the test.