en

Switching the dishwasher ON

 

 

 

 

 

Turn on the tap.

 

 

 

 

 

Set ON-OFF button “ A ” to ON, the dishwasher beeps

 

 

 

 

 

one time, All indicators “C1,C2,C3,C4,C5 ” light .

A

 

 

 

 

Press programme button “B1”, programme indicator

C1

C2

C3

C4

C5

C1” light.

 

 

 

 

 

If the door is closed, after 3 seconds, the programme

 

 

 

 

 

indicator “C1” will blink and the dishwasher beeps one

 

 

 

 

 

time, then the programme starts automatically.

 

 

 

 

 

 

B1

 

 

 

 

End of programme

Six beeps will indicate that the wash cycle has finished and all the indicators light.

Switching the dishwasher OFF

Several minutes after the programme has ended:

Set main switch “A” to OFF.

Open the door .

Remove dishes, etc. when they have cooled down.

Interrupping the programme

Open the door. Caution! There is a risk of water squirting out from inside the appliance. Do not open the door fully until spray arm has stopped rotating.

When you open the door, the dishwasher will beep ten times every thirty seconds.

If the appliance has already heated up or the hot water was switched ON and then the appliance door opened, leave the door ajar for several minutes and then close. Otherwise, the appliance door may open due to expansion.

Switching the dishwasher OFF while underway:

Press the ON-OFF button “A” and hold it in for about 3 seconds. In other situation, set main

switch “A” to OFF.

18

Page 19
Image 19
Haier 0120505609 Switching the dishwasher on, End of programme, Switching the dishwasher OFF, Interrupping the programme