Cisco Systems Catalyst 2960-24PC-L Switch Front Panel, Catalyst 2960 Series PoE-24

Chapter 1 Product Overview

Front Panel Description

Catalyst 2960-24PC-L 2960-24TC-L, 2960-48TC-L, 2960 -24LT-L, 2960-24TT-L, and 2960-48TT-L Switches

The 10/100 ports on the Catalyst 2960-24PC-L, 2960-24TC-L, 2960-48TC-L, 2960-24LT-L,

2960-24TT-L, and 2960-48TT-L switches are grouped in pairs. The first member of the pair (port 1) is above the second member (port 2), port 3 is above port 4, and so on.

The 24 Catalyst 2960-24PC-L switch 10/100 ports are PoE ports. See Figure 1-4.

Figure 1-4

SYST

RPS

STAT

DUPLX

SPEED

PoE

MODE

Catalyst 2960-24PC-L Switch Front Panel

1 2	3 4	5 6	7 8	9 10 11 12	13 14 15 16	17 18 19 20 21 22 23 24	Catalyst 2960 Series PoE-24
1X				11X	13X		23X		270102
							1	2
2X				12X	14X		24X
POWER	ETHERNET

1

10/100 PoE ports

2

12

Dual-purpose ports

The Catalyst 2960-24TC-L and Catalyst 2960-48TC-L switches have dual-purpose ports, that is, 10/100/1000 ports 1 and 2 can use either the SFP module or the RJ-45 connector for that port, but not both. Use the software to set the connector type for these ports. For more information about the dual-purpose port, see the “Dual-Purpose Port” section on page 1-11. See Figure 1-5and Figure 1-6.

Figure 1-5 Catalyst 2960-24TC-L Switch Front Panel

SYST

RPS

STAT

DUPLX

SPEED

MODE

12

110/100 ports 2 Dual-purpose ports

Figure 1-6 Catalyst 2960-48TC-L Switch Front Panel

137064

SYST

RPS

STAT

DUPLX

SPEED

MODE

1 2

1 10/100 ports 2 Dual-purpose ports

137066

Catalyst 2960 Switch Hardware Installation Guide

OL-7075-05 1-5