Cisco Systems specifications Catalyst 2960-24-S, 2960-24TC-S, and 2960-48TC-S Switches

Chapter 1 Product Overview

Front Panel Description

Catalyst 2960-24-S, 2960-24TC-S, and 2960-48TC-S Switches

The 10/100 ports on the Catalyst 2960-24-S switch are numbered as follows: The first member of the pair (port 1) is above the second member (port 2), port 3 is above port 4, and so on. See Figure 1-1.

Figure 1-1 Catalyst 2960-24-S Switch Front Panel

SYST

STAT

DUPLX

SPEED

MODE

Catalyst 2960 Series SI

191917

1

1

10/100 ports

The 10/100 ports on the Catalyst 2960-24TC-S and Catalyst 2960-48TC-S switches are numbered in the same way as the Catalyst 2960-24T-S switch. These switches have dual-purpose ports, that is, 10/100/1000 ports 1 and 2 can use either the SFP module or the RJ-45 connector for that port, but not both at the same time. Use the software to set the connector type for these ports. For more information about the dual-purpose port, see the “Dual-Purpose Port” section on page 1-11. See Figure 1-2and Figure 1-3.

Figure 1-2 Catalyst 2960-24TC-S Switch Front Panel

SYST

STAT

DUPLX

SPEED

MODE

Catalyst 2960 Series SI

191916

1

10/100 ports

2

12

Dual-purpose ports

Figure 1-3 Catalyst 2960-48TC-S Switch Front Panel

Catalyst 2960 Series SI

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

SYST

STAT

DUPLX

SPEED

MODE

191915

1

1 2

10/100 ports 2 Dual-purpose ports

Catalyst 2960 Switch Hardware Installation Guide

1-4 OL-7075-05