Cisco Systems 2960 Desk- or Shelf-Mounting with Mounting Screws, Rack-Mounting, Cabling Distance

Contents

Installing the Switch	3-6
Desk- or Shelf-Mounting (without Mounting Screws) 3-6
Desk- or Shelf-Mounting (with Mounting Screws) 3-7
Under the Desk- or Shelf-Mounting (with Mounting Screws) 3-9
Wall-Mounting (with Mounting Screws) 3-12
Magnet Mounting	3-14

	Rack-Mounting3-15
	Attaching Brackets to the Switch				3-15
	Mounting the Switch in a 19-Inch Rack					3-16
	Wall-Mounting (with Rack-Mount Brackets)					3-16
	Where to Go Next	3-18
	Troubleshooting 4-1
C H A P T E R 4
	Diagnosing Problems	4-1
	Verify Switch POST Results		4-2
	Monitor Switch LEDs 4-2
	Verify Switch Connections		4-2
	Bad or Damaged Cable		4-2
	Ethernet and Fiber Cables			4-3
	Link Status	4-3
	Transceiver Module Port Issues				4-3
	Port and Interface Settings			4-3
	Ping the End Device		4-4
	Spanning Tree Loops		4-4

		Monitor Switch Performance		4-4
		Speed, Duplex, and Autonegotiation			4-4
		Autonegotiation and NIC Cards 4-5
		Cabling Distance 4-5
		Clearing the Switch IP Address and Configuration 4-5
		Locating the Switch Serial Number		4-6
		Connector and Cable Specifications
A P P E N D I X A				A-1
		Connector Specifications	A-1
		10/100/1000 Ports	A-1
		Connecting to 10BASE-T- and 100BASE-TX-Compatible Devices A-1
		Connecting to 1000BASE-T Devices			A-2
		SFP Module Ports	A-3
		Dual-Purpose Ports	A-3
		Console Port A-4
					Catalyst 2960 Switch Hardware Installation Guide
	OL-7075-05					v