Cisco Systems Attaching Brackets to the Catalyst 2960 Switch, Syst Rps Stat Duplx Speed

Chapter 2 Switch Installation (24- and 48-Port Switches)

Installing the Switch

Attaching Brackets to the Catalyst 2960 Switch

The bracket orientation and the brackets that you use depend on whether you are attaching the brackets for a 19-inch or a 24-inch rack. For 19-inch racks, use bracket part number 700-8209-01; for 24-inch racks, use bracket part number 700-13248-01. Figure 2-2to Figure 2-7show how to attach each type of bracket to one side of the switch. Follow the same steps to attach the second bracket to the opposite side.

Figure 2-2 Attaching Brackets for 19-Inch Racks to a Catalyst 2960 Switch, Front Panel Forward

1

1XX

SYST

RPS

STAT

DUPLX

SPEED

2X MODE

1Phillips flat-head screws

11X
12X	137073

Figure 2-3 Attaching Brackets for 24-Inch Racks to a Catalyst 2960 Switch, Front Panel Forward

1

1X1X SYST RPS

STAT DUPLX SPEED

2X MODE

1Phillips flat-head screws

11X
12X	137074

Figure 2-4 Attaching Brackets for 19-Inch Racks to a Catalyst 2960 Switch, Rear Panel Forward

1

1 137075

Phillips flat-head screws

Catalyst 2960 Switch Hardware Installation Guide

OL-7075-05 2-9