Cisco Systems 2960 Warnings, Rack-Mounting, Removing Screws from the Switch, Wall-Mounting

Contents

C H A P T E R 2	Switch Installation (24- and 48-Port Switches)				2-1
	Preparing for Installation	2-1
	Warnings 2-2
	Statement 371—Power Cable and AC Adapter					2-3
	Guidelines for Particulate Matter			2-4
	Installation Guidelines	2-5
	Verifying Package Contents		2-6
	Verifying Switch Operation		2-7
	Installing the Switch 2-7
	Rack-Mounting2-8
	Removing Screws from the Switch 2-8
	Attaching Brackets to the Catalyst 2960 Switch					2-9
	Mounting the Switch in a Rack			2-11
	Attaching the Cable Guide 2-12
	Wall-Mounting2-12
	Attaching the Brackets to the Switch for Wall-Mounting2-13
	Attaching the RPS Connector Cover				2-13
	Mounting the Switch on a Wall			2-14

	Table- or Shelf-Mounting2-15
	Installing and Removing SFP Modules			2-15
	Installing SFP Modules into SFP Module Slots					2-16
	Removing SFP Modules from SFP Module Slots					2-17
	Connecting to the 10/100 and 10/100/1000 Ports					2-18
	Connecting to SFP Modules	2-19
	Connecting to Fiber-Optic SFP Modules				2-20
	Connecting to 1000BASE-T SFP Modules				2-21
	Connecting to a Dual-Purpose Port		2-22
	Where to Go Next 2-22
	Switch Installation (8-Port Switches)
C H A P T E R 3				3-1
	Preparing for Installation	3-1
	Warnings 3-1
	Statement 371—Power Cable and AC Adapter 3-2
	Installation Guidelines	3-3
	Equipment That You Supply		3-4
	Verifying Package Contents		3-5
	Verifying Switch Operation	3-6

Catalyst 2960 Switch Hardware Installation Guide

iv OL-7075-05