English |
| English |
|
|
|
Reinstallation: (see fig. # 4 and # 5)
1.As shown in fig. 4, dismantle the lower hinge and plastic pad from right side and then install them on the left side.
Bottom hinge axle
Plastic pad
Bottom hinge pad
fig. # 4
Bottom hinge
2.To install refrigerator door: make the left bottom hole of the refrigerator compartment door fall over the lower hinge axle, move door forward to make it straight and in alignment with central hinge. Install the central hinge again, turn the hinge axle until it completely enters the door body, then fix it with screws.
Central hinge pad
Central hinge axle
fig. # 5
3.As shown in fig. 5, install the central hinge and pad to the left side.
4.To install freezer door: make the left bottom hole of freezer door fall over the central hinge axle; raise upper hinge, so that hinge axle can be installed in the upper hole of the upper part of the freezer door; adjust door to make it straight and level.
5.As shown in Fig. 1, install the upper freezer hinge to the left corresponding position. (tighten the screws of upper hinge)
6.Replace the hinge cover as shown in Fig. 1.
9
