English
Custom Program: (12)
•This allows you to save a favorite cycle,set the desired settings and touch
“Custom Program”pad for 3 seconds. A beep will sound to indicate the cycle has been saved. To recall your custom cycle ,touch the “Custom Program”pad before drying a load. To change the saved cycle,set the desired settings and “Custom Program”pad must be again programmed for 3 seconds. You can also program
Function Light Indicator: (13)
-Child Lock: You can lock the controls to prevent any selections from being changed or You can lock the controls after you have started a cycle. Children can not accidentally start the dryer by touching pads when this option is selected.
To lock the dryer,touch and hold “Damp Dry Signal”for 3 seconds. A single beep tone is heard and Child Lock will glow. To unlock the dryer, touch and hold the “Damp Dry Signal” for 3 seconds.
-Check Filter: After the power pad is touched, the Check Filter indicator will flash until Start/Pause is selected.
This is just a reminder to clean the lint filter before the dry program starts.
-Dry: When lit this indicates the process the cycle is currently in drying mode.
-Cool Down: When lit this indicates the process the cycle is currently in cool down mode.
Understanding the Control Panel
HDE/HDG5000AW CHDE5000AW
POWER | START/PAUSE |
1 | 2 | 3 | 4 | 5 |
Panel
13 | 12 | 13 |
6 | 9 | 7 | 8 | 10 | 11 |
Note: Features may vary per model.
Power On/Off Button: (1)
• Press the button to power on the dryer. To power off, press button again.
Cycle Select Dial: (2)
• Select from the
22
