Haier CHDE5300AW, HDG5300AW, CHDE5000AW, HDG5000AW user manual Manual DRY Cycle, Rack DRY Cycle

English

Manual DRY CYCLE

HDE/HDG 5000AW, CHDE5000AW

1.Press power ON button to power on. The control panel will beep once and the dryer will change from “OFF” to the operating status. If Start/Pause button is not pressed in five minutes after powering on, the dryer will automatically return to OFF status.

2.Set the cycle select dial to Manual Dry Cycle.

3.Press “More or Less Time” button to set the required drying time.

4-6. Press “Temperature,” “Signal,” “Wrinkle Saver,” to define the required programs.

Note: For “Manual Dry” program use of “Temperature,” “Signal,” “Wrinkle Saver,” is the same as for auto-programs. “Anti-Bacterial,” “Damp Dry Signal” and “Dry Level” are inactive, and 2 beeps will sound if pressed.

7. Touch “Start/Pause” button to activate cycle.

RACK DRY CYCLE

HDE/HDG 5300AW, CHDE5300AW

1.Touch power On pad to power on.

2.Touch “Manual Dry Cycles” pad and select Rack Dry.

3.Touch “Temperature” pad to a suitable temperature.

4.Touch “More Time” and “Less Time” pads to set a suitable time.

5.Touch “Start/Pause” pad to activate.

31