English

RACK DRY CYCLE

HDE/HDG 5000AW, CHDE5000AW

1.Press power On button to power on.

2.Turn the cycle dial to Manual Dry cycle and select Rack Dry.

3.Press “Temperature” button to select suitable temperature.

4.Press “More Time” and “Less Time” buttons to set a suitable time.

5.Press “Start/Pause” button to activate.

Other Features

Your dryer also has the following features for your convenience:

Lint Filter:

All dryers come with a lint filter that needs to be cleaned before or after every use (read “Care and Cleaning Guide” Section).

Leveling Legs:

Your dryer has four leveling legs which are located in the front and rear corners of your dryer. After installing your dryer in its final position, you can level your dryer.

Leveling legs can be adjusted by turning them clockwise to raise your dryer or by turning them counterclockwise to lower your dryer.

Pausing or Restarting:

To pause the dryer at any time open the door or touch or press the start/pause button once. To restart, close door and touch or press start/pause button once. Note: Dryer will continue from where the cycle was interrupted, when door is closed within 5 minutes. If the cycle is interrupted for more than 5 minutes the dryer will shut off. New cycle settings must be selected before restarting the dryer.

32

Page 33
Image 33
Haier HDG5000AW, HDG5300AW, CHDE5000AW, CHDE5300AW user manual Lint Filter, Pausing or Restarting