English
Bulk Items | Drying bulky clothing, such as bed sheets. |
|
|
Heavy | Heavy weight material such as jeans or bath towels. |
|
|
White | For clothes such as linens and sheets. |
|
|
Normal | Use to select normal clothes worn in daily use. |
|
|
Delicate | Drying small quantity clothes and delicate fabric. |
|
|
Press Free | For |
|
|
Start/Pause Button: (3)
•Press the button to turn the dryer ON. Press this button once to start the dry process. Press this button once again to pause the activity during the dry cycle.
Dry Levels: (4)
•Used to set drying levels of auto programs. There are 3 selections: More,
Normal, and Less.
Note: Dry level selection can only be made while using the Auto (sensor) Dry Cycles.
Temperature Button: (5)
•Used to set drying temperatures. There are four available drying temperatures to choose from: High, Medium, Low, and Air Dry.
Note: In rack dry cycle the temperature selection is limited to Extra Low and Air Dry. For Auto Dry Cycles the temperature can be selected only for settings below the default setting, Air Dry cannot be selected.
Signal: (6)
•This feature selects the beeping volume or turns off the buzzer entirely. There are three choices: Louder, Softer or Off.
Anti Bacterial (7)
•This function can be selected only in certain cycles. Here the heat temp is raised to the highest dry level. This option can only be used with heavy, bulky items, white and normal cycle.
Note: Cannot use on delicate fabrics
Wrinkle Saver Button: (8)
•This convenient feature helps keep wrinkles from setting when you cannot unload the dryer at the end of a cycle. The dryer will stop and then tumble for a brief period every few minutes. Press the wrinkle saver button to activate. This feature will work for 1 hour after the drying program is completed. Stop the setting at any time by pressing the wrinkle saver button or opening the dryer door.
More Time & Less Time Button: (9)
•Used to set time from 0 to 2 hours when Timed Dry, Rack Dry, Speed Dry or
Touch Up cycle is selected.
Damp Dry Signal (10)
•If activated the dryer will beep when the load is approximately 80% dry. This will allow you to remove lightweight items that are dry or other items that you may wish to iron. This feature is available for “Auto Dry” cycles only.
23