9
Confirmif there's
specialrequirement
forthe laundries.
Clearthe pocket.
Takeout the coins ,
sand,hairpins etc.
Fastenthe buttons
andzippers.
Whenthe pulsator is
running,the buttons of
thelaundries may cause
noise.For the sake of
discretion,please put
the laundries with
buttonsinto other
laundries.
Thequantity of the
laundriesshall not
exceedthe rated
value.The big
laundrieslike the
jeansshall be put
inloosely.
a.Check if the laundries are applicable for washing with machine.
b.Divide the laundries with unfast color from other laundries.
c.Put those laundries difficult to absorb water into water with hand.
d.For those laundries with heavy soil, please first remove the dirt like mud or dust. For the parts with heavy soil,
pleaseapply detergent in advance, which can make it easier to remove the soil.
e.For those laundries that may get lint ball and those with long fur, turn it over before putting in.
f. Do not put those laundries polluted by chemicals directly into the washing machine.
g.For those small laundriesand those may get twisting or worn, andwoollen/fur laundries, pleaseput them into
meshbag for washing.
Preparation before washing
Preparation before washing
1.Connectthe water inlet hose.
2.Confirmthat the washing machine is earthed
reliably.Then insert the power plug into the
receptacle.Do not connect the earth terminal
tothe gas pipe and tap water pipe.
3.Putdown thedrain hose.
4.Slantingor uneven ground may result in
unstableworking or abnormal noise. Please
makethe machine stand horizontally.
Pay attention to followings before washing the laundries
8
Connection between the water inlet hose and the washer
1.Donot take off the water absorption cushion. Please check if the
cushionis dropped or damaged before each usage. If it happens
pleasecontact our after-sale department immediately.
2.Putthe nut of the water inlet hose on the valve jointer.
3.Fastenthe nut. Swing it gently to confirm if it's suitable.
Thenew hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused.
nutofthe water
inlethose
jointerofthe
waterinletvalve
waterabsorption
cushion.
Connection between the jointer of the water inlet hose and the water inlet hose
1.Pushdown the slider. Insert the water inlet hose into the jointer.
2.Hangthe lock lever to the jointer. Release the slider till a click
soundis heard.
Lockinglevel
thejointer of the
waterinlet hose
Slider
Check the connection between the jointer of the water inlet hose
and the water faucet
1.Swingthe hose gently to confirm if it is fastened stable.
2.Afterinstallation, open the faucet to check if it leaks.
3.Donot bend the hose with overstrain.
4.Beforeeach usage please check if the connection
betweenthe jointer of the water inlet hose and the
waterfaucet, and the installation of the water inlet
hoseare firm, so as to prevent dropping from
improperinstallation position.
Dismantle the water inlet hose
1.Closethe water faucet.
2.Pressthe locking lever. Push down the slider. Then pull of the water inlet hose.
Ifthe machine is used frequently, the jointer of the water inlet hose can be
kepton the faucet to prevent damaging the fixing screw.
Lockinglevel
Slider