Haier HWM65-828 user manual Close the top lid, Finish washing, Push the START/PAUSE button

Before washing, please fold up the laundry as needed, then put the laundry into the inner tub, flat and neat.

These fabrics are not washable:

1.Fabrics that deform when soaked in water;

2.Fabrics that shrink, discolor or go through other exterior changes when soaked in water; 3.Fabrics that lose original texture when soaked in water;

4.Fabrics that discolor when soaked in water;

5.Fabrics that have pilling or pressed pile when soaked in water; 6.Fabrics that is damageable when soaked in water.

Upon completion of washing, iron the laundry with a steam iron.

Hold the steam iron above		When shrinkage occurs
		Stretch the laundry to its original
the laundry and do not touch
		size and locate it with pins. Use
the laundry. Reshape the
		a steam iron to dry the laundry
laundry. (As illustrated
		completely. Do not touch the
in Fig 1)	Figure 1		Pin
		laundry. (As illustrated in Fig 2)	Figure 2

3 Push "SOAK" "WASH" "RINSE" "SPIN" button to select suitable procedure program

Even there's no water in the tub, a certain period is required before spin starting.

Separate the laundries that are not colorfast from other laundries in washing.

Safety precautions

Do not put hand into the rotating tub. It is dangerous	Do not decompose, repair or alter the machine by
even if the rotation speed is slow. Take special care of
	yourself.
the children. Keep children away from the washing
machine to avoid them climbing on.

Do not put any hot or heavy items (such as the	Do not wash laundries with volatile materials
kettle with hot water) on the washing machine.	(such as thinner, petrol etc.).
	Benzene

The soak procedure can work in cooperation with automatic programs like STANDARD, HEAVY, CHILD, MEMORY GENTLE. There is intermittent pulsator stirring during soak.

After the machine starts operation, you can only set the program and procedure during washing and soaking, During rinsing ,you can only set the spinning time, and can not make setting in other cases.

During SPEEDY, TUB DRY programs, push the WASH, RINSE,SPIN button the machine has no reaction.

4 Push the " WATER LEVEL "button, select suitable water level

For STANDARD program, the washing machine will execute fuzzy program automatically to detect the cloth. After defection, it can set the water level automatically.To select other water level, first push the "START/PAUSE" button, then push the "WATER LEVEL" button to set the water level.

5 Push the "DELAY" button to select suitable reserve wash program

After switching on the power, the reserve program is set to off mode automatically. If you need to set the washing procedure to be finished at reserved time, please push the DELAY "+ - " button to set the reserve wash program. Refer to reserve button in Page 13 for selection.

When the DELAY function is activated, the indicator light of the program you have set will be off. The digitron will display remaining delay time(hour).

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

Keep the machine away from direct sunlight and heat source like the heater.

During reserve procedure, push the "DELAY"+ - " button to display the reserve mode. To change the running program or cancel the reserve setting, you need to switch off the

power and make new selection.

6 Push the "START/PAUSE" button

Close the top lid

As the top lid opened, the washer will automatically alarm and stop running, exclusively during draining and water filling.

Finish washing

After finishing washing ,it'll alarm and switch off power automatically.

Please keep the lint filter in good		condition,		To protect your laundries and washing machine,
and install it	to proper position during			please take out all of the coins, buttons, sand, hairpin
washing. If	the lint filter is lost or	Install	Dismantle	and other foreign materials before washing.
damaged, please contact the customer
care agent of our company.

Please check if the water faucet is open, and if the connection of the water inlet pipe is proper.

It is suggested to use foamless washing powder.

To change the direction of drain pipe, please contact the customer care agent of our company. Please don t use the washer in the environment below 0 C; if the washer has been stored below 0 C, please be sure to ensure the washer is placed under the room temperature for 2~4 hours and then use otherwise the washing effects may be lowered or the washer may be damaged.