Hamilton Beach 04161 How to Assemble and Use, Before First Use, Selecting the Proper Location

840129900 ENv02.qxd 11/1/04 11:01 AM Page 5

How to Assemble and Use

IMPORTANT: Your Hamilton Beach air purifier is designed for easy use and maintenance. Make sure that the HEPA filter and carbon pre-filter are properly installed before use.

Before First Use

Be sure to remove all packing materials. The carbon pre-filter is packed in a plastic bag inside the air purifier for shipping.

Refer to page 6 for unpacking and installation instructions.

Selecting the Proper Location

To prevent the risk of personal injury or damage to the air purifier and provide the best possible performance of your air purifier, follow the placement guidelines below:

DO:	DO NOT:
• Place the air purifier on a flat, stable	• Do not stand, sit, or place any
surface.	objects
	on the air
	purifier. It is
	not designed
	to support
	additional
	weight.

•Place the air purifier near an electrical outlet where it is out of the way. Make sure that the air purifier and the cord do not present tripping hazards.

•Select a central location with adequate air circulation.

•Turn off and unplug the air purifier before moving or servicing it, or if it will not be used for several days.

•Route the electrical cord clear of furniture to prevent damage from pinching.

•Do not block the air intake and outlet grilles with drapes, curtains, or blinds. This may cause reduced performance.

•Do not use in a kitchen, garage, or area with grease, oil or chemicals such as solvents or insecticides.

•Do not place on or near heat sources such as stoves, radiators, or heaters, or in direct sunlight.

•To reduce electrical noise and interference, do not place on or near, or plug into the same outlet as TVs, baby monitors, or cordless phones.

5