2

IMPORTANT SAFEGUARDS

SAVE THESE INSTRUCTIONS!

When using electrical appliances, basic
safety precautions should always be
followed, including the following:
1. Read all instructions. Keep these
instructions for future use.
2. Do not touch hot surfaces. Use handles
or knobs.
3. To protect against electrical shock, do
not immerse cord assembly, plug, or
the base in water or other liquid.
4. Close supervision is necessary when
any appliance is used by or near
children.
5. Unplug from outlet when not in use and
before cleaning. Allow to cool before
putting on or taking off parts, and
before cleaning the appliance.
6. To disconnect, turn control to “min”
and remove plug from wall outlet.
7. Do not leave the appliance unattended
when in use.
8. Do not operate any appliance with a
damaged cord or plug, or after the
appliance malfunctions, or is dropped
or damaged in any manner. Call our
toll-free customer assistance number
for information on examination, repair,
or adjustment.
9. Do not let cord hang over edge of
table or counter, or touch hot surfaces,
including the stove.
10. Do not place on or near a hot gas or
electric burner, or in a heated oven.
11. Always use the appliance on a dry level
surface.
12. Do not use appliance for other than
intended use.
13. Extreme caution must be used when
moving an appliance containing hot oil
or other hot liquids.
14. Use extreme caution when removing
trays or disposing of hot grease.
15. Always unplug grill and then remove
cord before attempting to move the
grill.
16. The use of accessory attachments not
recommended by appliance manufac-
turer may cause injuries.
17. Use only on properly grounded outlet.
18. Do not use outdoors.
wWARNING

Fire Hazard

• Do not operate while unattended.

• Do not cover or use near curtains, walls, cabinets, paper or plastic

products, cloth towels, etc.

• Close supervision is necessary when used by or near children.

• Always unplug unit when not in use.

• Failure to follow these instructions can result in death or fire.

840127500 Ev03.qxd 7/8/04 10:20 AM Page 2