Cleaning Your Fryer | w WARNING | Burn Hazard. |
| components thoroughly before using. | |
|
| To avoid eruptions and/or spatter of hot oil, dry all fryer |
1
Make sure fryer is turned to MIN. Unplug from wall outlet. Wait until oil has cooled. This can take several hours.
2
Lift control panel up and out of base. Do not drip oil on base.
Do not immerse heating element assembly in water.
NOTE: To avoid damaging fryer, use care when cleaning heating element assembly. Gently wipe with soft cloth dampened with hot, soapy water.
3
Lift oil tank from fryer and pour out oil. Wipe all excess oil or oil film from oil tank.
4
Clean outside of base with hot, soapy water. Do not immerse unit in water.
5
Press OPEN button to release and open lid. Hold base with one hand; use other hand to slightly tilt lid towards the control panel and pull lid up.
6
TO REINSERT LID: Place lid on the lid |
|
hinge, making sure the silver spring |
|
lines up with the opening on the back of |
|
the base. Slightly tilt lid towards control |
|
panel; gently press lid down into place. | 9 |
840217100 ENv05.indd 9 | 4/30/12 11:42 AM |
