![Parts and Features](/images/new-backgrounds/57055/570555x1.webp)
840152800 ENv04.qxd 6/22/06 3:55 PM Page 3
Parts and Features
1.Lid
2.
3. Power Base
4. Power Switch I = ON O = OFF
Using Your Electric Kettle
BEFORE FIRST USE: Fill kettle to MAX indicator on water level window and bring to a boil until kettle shuts off automatically. Discard water and repeat. Rinse out kettle 2 or 3 times. The kettle is now ready for use.
1.Remove from power base before filling.
2.Fill kettle with required amount of water. Ensure that water level is between MIN and MAX on the water level indicator. If using the mesh filter, it must be in place.
3.Make sure that the lid is in place and the power base is on a level surface.
If lid is not in place, auto
4.Plug into outlet and turn on ( l ).
5.The kettle will switch off (O) automatically when the water has boiled. (Remember, the surface of the kettle gets hot; take
6.After use, unplug kettle and empty.
NOTE: Use water only in the kettle. If used for foods or beverage such as tea or coffee, the warranty will be voided.
wWARNING
Burn Hazard
If kettle is overfilled, boiling water may spit out of the spout.
If Heating Element Discolors
It is normal for stainless steel heating elements to discolor. This does not affect |
|
the performance of the kettle. Do not use abrasive scouring pads or cleaners as |
|
this may damage the stainless steel surface. | 3 |