Continuous Processing
IMPORTANT: When using the continuous feed chute the food gate must be removed and the continuous feed disc must be in place.
1.Make sure the Control Switch is turned to OFF ( O ) and the unit is unplugged.
2.Lock the bowl onto base. (See “How to Lock the Bowl” on page 4.)
3. Place disk shaft onto center column, select desired side of Continuous Feed Disc and place onto disc shaft. The Continuous Feed Disc has a ribbed side to use for cabbage and leafy greens, and a flat side to use with other foods.
4.Select desired side of Reversible Slicer/Shredder Disc and place that side up, on disc shaft.
5.REMOVE FOOD GATE FROM CONTINUOUS FEED COVER TO PREVENT DAMAGE TO UNIT.
6.Lock on cover. (See “How to Lock the Cover” on page 4.)
7.Plug in unit and select speed. Process food. Check the Continuous Feed Chute frequently to make sure the opening is not blocked. If blocked, turn unit off and unplug. Clear blockage, then reassemble and continue processing.
NOTE: When using the Continuous Feed Chute, some food may fall into the food processor bowl.
6
