Terminal Setup
The option of Run Airloader on terminal can be selected. The Windows CE options of
Run application at startup and Hide task bar can be selected. Also, there is a CE
option that makes the terminal program act more
The Code page setting determines the Windows font code page that will be used on the
terminal. The default is zero, which means th the terminal will use the standard Unicode
r
Use GUI menus and screens
"Windows-like".
at
code page. This option is necessary to turn on character sets for foreign languages. Fo
more information on code pages, see the document entitled “Code Pages” at
http://www.connectrf.com/faq.htm.
Enable aggressive linear decoding and Linear search range have to do with
optimizing how the imager reads barcodes. Check the box in front of the linear decoding
option to enable it and use the search range scroll box to make a selection from 1 to 6.
Enabling centering beam during imaging means that when the imager is on, a darker
red "line" appears in the middle of the scanning area to help in positioning the barcode.
Check the box in front of this option to enable it.
The Timeout for laser aiming beam option applies only to terminals with long-range
laser scanners, not imagers. When the user first pulls the trigger, the scanner emits a
bright dot, which is used to aim the scanner at a barcode that is far away. This timeout is
how long the dot stays on before the scanning beam appears. Enter in the box the number
of seconds after which the laser aiming beam will time out.
Click on OK after entering information.
Supported Equipment Manual
•
January, 2006 2-7