Hand Held Products 9500, 7400 Sending Program Files to the 7400/9500 Terminal

Terminal Setup
Sending Program Files to the 7400/9500 Terminal
1. Cold boot the inal.
2. On the terminal, click on Enter.
3. Double-click on the My Computer icon
4. Double-click on the IPSM icon.
5. Select the Twin Client folder.
6. Choose Delete the File menu.
7. Choose Yes at the prompts.
8. Cold boot the terminal.
9. Click Enter.
10. Go to Start, gs, and Control Pa
11. Double-click on the Communication icon.
12. Select the PC Connection tab.
13. Chose a baud rate of Direct 115200 when using the terminal with the cable, and
choose a baud rate of Infrared 57600 when using the terminal in the cradle.
14. Go into Tweak Activesync (an Hand Held Products utility) on the PC.
15. If the terminal is in the cradle, make sure the baud rate is 57600, and
choose a baud rate of 115200 if you ar ng a cable with the t
term
.
from
Settin nel.
e usi erminal.
16. Click on Close Activesy click on Open A nc. nc, then ctivesy
Supported Equipment Manual • January, 2006 2-51