Terminal Setup
Synchronizing Configuration Files
Click to put a check in the Synchronize Configuration Files box to enable automatic
onization of configuration files on the terminal. When the tsynchr erminal is cold booted,
its configuration files will be compared with the most recent on the PC. The terminal is
updated automatically if it does not have the latest revision.
Synchronizing Program Files
Click to put a check in the Synchronize Program Files box to enable automatic
synchronization of program files on the terminal. When the terminal is cold booted, its
program files will be compared with the most recent on the PC. The terminal is updated
automatically if it does not have the latest revision.
Automatic IP Address Assignment
box is
checked.
Note: The 9500 terminal does not require this step to find the Airloader server.
New terminals will be assigned IP addresses automatically if the following
Note: Do not check this option if a DHCP server is configured to manage address
assignments.
To set the addresses, click on the Addresses button to access the Segment Address
Assignments dialog box, as shown in the following figure.
2-28 Supported Equipment Manual
•
January, 2006