Terminal Setup
Standard Setup nd can be modified by the following methods:
Twin Client Manager.
to use the Twin Client Manager and the terminal menu
systems to set up the terminal. Also described are the methods for authorizing the
The Twin Client Manager provides a Standard Settings tab for automatic setup of the
terminals. Choose Standard under the View menu. The options within this tab vary
s described below.
VT and HP Settings
Select the VT and HP emulation setup by clicking on the S
The default terminal setup is sufficient for most installations. However, to meet site-
specific requirements, it may be necessary to customize terminal operation. The standard
setup options simplify this process a
• Using the
• Using the Twin Client terminal menu system.
This section describes how
terminal software.
Setup Using Twin Client Manager
according to the emulation selected, each of which i
ettings menu and then the
Emulation menu, as shown below.
Then click on the VT100, VT220, or HP700 selection, as shown below.
k on OK after the selection is made, and return to the main Twin Client Manager Clic
menu. The standard settings tab will now reflect the settings for VT/HP emulation.
Supported Equipment Manual
•
January, 2006 2-13