Hand Held Products 9500, 7400 Sending Configuration Files to the 7400/9500 Terminal

Terminal Setup
Sending Configuration Files to the 7400/9500 Terminal
rminal.
.
n the icon.
6. C n using the terminal in the cradle or a
baud rate of Direct 115200 when using the terminal with the cable.
7. Click on OK.
8. Close the screen.
9. Go into Tweak Activesync (an Hand Held Products utility) on the PC.
10. If the terminal is in the cradle, make sure the baud rate is 57600, and
choose a baud rate of 115200 if you are using a cable with the terminal.
1. Cold boot the te
2. Click
Enter.
3. Go to Start, Settings, and Control Panel on the terminal
4. Double-click o Communications
5. Select the PC Connection tab.
hoose a baud rate of Infrared 57600 whe
11. Click on Close Activesync, then click on Open Activesync.
Supported Equipment Manual • January, 2006 2-45