Note: • Do not place the remote control in hot or humid locations. Protect the remote control from shock or vibration to avoid damages.
•Check the remote control batteries on a regular basis. Clean any stain on the rear battery cover immediately and use new batteries if fluid is leaking from old batteries.
4.2Troubleshooting
No picture and | • Connect the power cord properly. | |
sound. | • Press the POWER key on the control panel or | |
| ||
| remote control. | |
| • Press the SOURCE key to cycle through | |
| connected video sources. | |
| • Press CH UP or CH DOWN to switch to other | |
| TV stations. | |
| • Check the TV/CATV OSD settings. | |
| • Make sure all cables are connected properly. | |
| • Make sure the video signal cable is | |
| connected properly. | |
|
| |
No picture, or poor | • Check the antenna and cable connections. | |
picture, but sound | • Adjust the brightness in the OSD menus. | |
is OK. | ||
| ||
|
| |
Picture is not in | • Adjust the saturation in the OSD menus. | |
color. | • Make sure all cables are connected properly. | |
| ||
|
|
56 
