Install the Wallbar
Tools Required (not included): a) adjustable wrench, b) drill with 1/4" (6.4 mm) bit suitable for the wall surface, c) Philips head screwdriver, d) silicon sealant, e) plumbers’ thread tape (i.e. TeflonTM tape)
•Remove decorative screw covers from wall bar end pieces. Position bar so hand shower may be adjusted at a convenient height for intended users. Mark location of
mounting holes. Put wall bar in a safe location. CAU- TION: Do not install wall bar directly between shower arm and valve. A water line may be located there and may be damaged while drilling mounting holes.
•Drill holes through shower wall. Install anchors. Seal wall around the
anchors with silicon sealant.
•Attach wall bar to wall using screws and metal washers provided.
• Reinstall decorative screw covers.
3
