Sun Microsystems 2.0 manual Hardware Installation and Removal

C H A P T E R 2

Hardware Installation and Removal

This chapter describes the tasks required to install and remove the NEM when the Sun Blade 8000 Modular System is in a powered-on state.

Note – If you are powering on the Sun Blade 8000 Modular System or Sun Blade 8000 P Modular System for the first time, follow the installation instructions in the Sun Blade 8000 Series Installation Guide.

This chapter contains the following topics:

■“Observing ESD and Handling Precautions” on page 8

■“Installing the NEM” on page 8

■“Configuring the NEM For Hot-Plug Operation” on page 14

■“Verifying a Hot-Insert Operation” on page 15

■“Replacing a NEM” on page 18

7