OPERATING INSTRUCTIONS
RECORDING
1
2
3
4
1.Set up all the functions of the DVR following “Programming the DVR”.
2.Press the record button to begin recording according to the schedule you have set.
Each Channel set to record will dis- play a recording symbol [
] next to the channel number.
AUDIO
The channel which is set to audio will display one of the following audio symbols next to the record symbol.
- Audio output is off.
- Audio output is on and audio is attached to the indicated channel. When the symbol is red it indicates that audio is currently recording.
To mute the audio signal, press the DOWN 
button. The audio signal will continue to record and can be heard in playback mode.
RECORDING MODE
One of the following will display along the bottom left of the screen:
OTHER DATA
The following will display along the remaining lower edge of the screen:
[M]or [S]- Indicates which hard drive is in use (M=Master, S= slave).
#% - Displays the percentage of hard drive disk space used.
YYYY/MM/DD - Displays current Year/Month/Day.
HH:MM:SS - Displays current time (hours:minutes:seconds).
Note: If the date, time or any other settings are incorrect you will need to stop recording and go back to the set up menu to reset the functions.
STOPPING
To stop recording, press the
STOP 
button. If the password func- tion is enabled you will be prompted for the password and will not be able to stop recording without the current password.
REV 10h
SKU 67139 | For technical questions, please call | Page 13 |
