Starting the DVR
1.Once the unit is connected and plugged in, the Power LED will light up.
2.Initially, the DVR will
checking hdd……
master [maxtOr stm3250310a] slave……
3.The DVR will then automatically de- tect the hard drive and show the hard drive information.
If there is any problem with the hard drive, the DVR will display the infor- mation and will not finish its boot up program.
checking hdd……
master [ maxtOr s
(select) FOrmat / (menu) cancel?
Note: When detecting a new hard drive, the DVR will prompt you to format the hard drive.
Press (SEL) to format the new hard drive, or (MENU) to cancel and enter the system.
4.After the DVR has finished booting up, it will enter the mode it is pro- grammed for, including recording if it is the scheduled time period for recording.
REV 10h
SKU 67139 | For technical questions, please call | Page 12 |
